Using Network Function; Network Connection - Panasonic TH-47LFX6 Operating Instructions Manual

Using Network Function

Network Connection

This unit has a network function to control the network connected display with your computer.
Note:
To use the network function, set each "Network Setup" setting and make sure to set the "Control I/F Select" to "LAN".
(see page 43)
When "LAN" is set, power indicator lights orange under the condition of power "Off" with remote control (stand-by
state).
Example of network connection
COMPUTER
Hub or broadband router
Notes:
• Make sure the broadband router or hub supports 100BASE-TX.
• Use a LAN cable that is compliant with "CAT5" or higher standards.
• Touching the DIGITAL LINK terminal with a statically charged hand (body) may cause damage due to its
discharge.
Do not touch the DIGITAL LINK terminal or a metal part of the LAN cable.
• For instructions on how to connect, consult your network administrator.
LAN cable
(not supplied)
Display (main unit, rear)
Remove the terminal cover (see page 9)
49