Port Forwarding Setup - EnGenius ESR350 User Manual

Port Forwarding Setup

Port forwarding enables multiple server applications on a LAN to serve clients on a WAN over a single WAN IP address. The router
accepts incoming client packets, filters them based on the destination WAN, or public, port and protocol and forwards the packets to
the appropriate LAN, or local, port. Unlike the DMZ feature, port forwarding protects LAN devices behind the firewall.
To view the Port Forwardung settings, click Advanced then select Port Forwarding.
Enable Port Forwarding
Click Enable Port Forwarding to active port forwarding.
Description
Enter notes or details about the forwarded port configuration.
Local IP
Enter the local IP address of the server behind the NAT firewall.
Protocol
Select the protocol to use for mapping from the following: TCP,
UDP or Both.
Local Port
Enter the LAN port number that WAN client packets will be
forward to.
Public Port
Enter the WAN port number that clients will send their packets
to.
Click Add to append a new configuration to the table or Reset
to discard changes.
111