Configuring Dynamic IP
Dynamic IP addressing assigns a different IP address each time
a device connects to an ISP (Internet Service Provider) and most
commonly used by cable ISPs.
To view the Dynamic IP, click Internet then select Dynamic IP.
Dynamic IP
Hostname
Assign a name for the Internet connection type. This field can be
blank.
MTU (Maximum Transmission Unit)
Allows you to configure the MTU. The MTU specifies the largest
packet size permitted for an internet transmission. The factory
default MTU size for Dynamic IP (DHCP) is 1500. The MTU size
can be set between 512 and 1500.
Clone MAC
Enter the MAC address of your computer's (or tablet's) network
embedded Network Interface Card (NIC) in the MAC address field
and click Clone MAC.
Note: Some ISP providers require registering the MAC address of
the Network Interface Card (NIC) connected directly to the cable or
DSL modem. Clone MAC masks the router's MAC address with the
MAC address of the computer's NIC.
51