Qos; 802.1P Default Priority - EnGenius EGS5110P User Manual

M
ANAGEMENT

2.4 QoS

The QoS menu enables traffic to be prioritized, excessive broadcast and multicast
traffic to be avoided and overall bandwidth to be limited on a port-by-port basis. This
chapter describes these functions.

2.4.1 802.1p Default Priority

Click the 802.1p Default Priority link under the QoS menu to define which 802.1p/Q
priority is applied to untagged ingress traffic. The priority level is from 0 to 7.
EGS5110P supports four class quality levels: low, normal, medium, and high. To find
out how to map the priority value to one of the four classes, refer to "CoS Priority
Class" on page 2-26.
L
ABEL
Port
Trunk
Priority
Apply
This shows the port number.
This shows the trunk number (if any are defined for this port). Ports
assigned to the same trunk group are assigned the same priority level.
Select the priority for untagged traffic arriving on this port.
Click this to apply settings.
2-25
D
ESCRIPTION
Q S
O