M
L2 F
ANAGEMENT
EATURE
2.2 L2 Feature
The L2 Feature menu enables port trunking, control of multicast traffic flooding, port
mirroring, cabling loop detection and MAC address table management. This chapter
describes these functions.
2.2.1 Port Trunking
Use the Port Trunking page to link multiple cables/ports in a parallel connection to
increase the throughput beyond that of a single connection. The linked cables/ports
can also act to create link redundancy.
Note:
You must enable trunk mode before you can add a port to a trunk group.
To access the page, click L2 Feature -> Port Trunking.
L
D
ABEL
ESCRIPTION
Group
This shows the trunk number.
2-9