Discovery In A Network Without A Dhcp Server; Web Access - EnGenius EGS5110P User Manual

G S
ETTING TARTED
1.3.2 Discovery in a Network without a
DHCP Server
Use this procedure to setup the device within a network requiring a static IP address.
1. Connect one end of an Ethernet cable (RJ-45) to the LAN port of your PC and
the other end to the device.
2. Connect the power cable to the device and turn it on.
3. On the PC connected to the device, change the PC's IP settings with those of
the device: 192.168.0.0/24 subnet.
4. Open a Web browser on the PC and enter the following address (default): http:/
/192.168.0.239.
5. On the login screen, use the following information.
Password: password
6. Once logged in, click System -> IP Setting and select Static IP under the Sys-
tem Setting menu to configure the IP settings of the management interface.
7. Enter the IP address, subnet mask and gateway as given by your system
administrator.
8. Click Apply.
9. Connect the device to your network.

1.4 Web Access

Use this procedure to access the management interface through a Web browser for
device configuration.
1. Open a Web browser on your PC and enter the following address (default):
http://192.168.0.239.
2. On the login screen, use the following information.
Password: password
1-3
O
VERVIEW