Cable Diagnostics - EnGenius EGS5110P User Manual

M
ANAGEMENT

2.1.6 Cable Diagnostics

You can use the Cable Diagnostics page to perform a diagnostic on each cable con-
nected to the device ports.
The cable status and length are displayed after a test is performed.
To access the page, click System -> Cable Diagnostics.
L
ABEL
Port
Status
Cable Length
Test
Use this to select the port number.
This shows the state of the cable.
This shows the cable length in meters.
Click this to start the test.
2-6
D
ESCRIPTION
C D
ABLE IAGNOSTICS