Connecting Other Company's Image Equipment; Other Functions - Clarion VRX848RVD Owner's Manual

Connecting Other
Company's Image Equipment
RGB type or composite type images from other
company's equipment can be displayed on this
unit.
Be sure to perform this setting after connecting
the RGB type or composite type image
equipment to the RGB terminal.
1. When the panel is open, press the [ADJ]
button to show the adjustment selection
display.
2. Touch the [GENERAL] key.
Touch the [CONNECT] key to select the
following items:
3. Touch the [OTHR NVG] key or [COMPO] key
to select "OTHR NVG" or "COMPO".
∗ When a Clarion navigation system
(NAX9500E) is connected, set to "OTHR
NVG". This must be set by the remote control
unit. When using a navigation system by a
manufacturer other than Clarion, set to
"COMPO".
Display changeover
When the panel is open, it is possible to change
over between AV display and external
equipment display using the [ADJ] button.
1. To switch from AV screen to navigation
screen, hold the [ADJ] button depressed for
1 sec.
2. To switch back to AV screen, press the [ADJ]
button.
58
VRX848RVD/VRX743R

Other Functions

Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, TV stations and
CD changer. The numbers of titles that can be
entered for each mode are as follows.
Mode
CD mode
TV mode
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
DCZ628 connected
∗ You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TV) mode. Cancel each of those
operations before entering titles.
1. Press the [FUNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD in the CD changer or a
CD track or tune in to a TV station for which
you want to enter the title.
3. Touch the screen (TV mode only).
4. Touch the [LIST] key to display the LIST
screen.
5. Touch the [USER TTL] key.
The title input mode display appears.
6. Touch the characters, symbols, etc. shown in
the display to input titles.
" " : Centering
"CLEAR" : Backspace
" " : Space
"MEMO" : Memory
"z(w)" : Scroll
Notes:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
(z) at the lower left of the display.
7. Repeat the step 6 to enter the complete title.
8. Touch the [MEMO] key for 2 seconds or
longer to store the title into memory and
cancel title input mode.
Number of titles
50 titles
15 titles
Number of titles
60 titles
100 titles
50 titles
100 titles