Preset Scan - Clarion VRX848RVD Owner's Manual

TV Operations
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the [BAND] button and select the
desired TV band. (TV1 or TV2)
2. Touch the screen to display the menu, then
touch [LIST] key.
3. Touch and hold the [AS] key for 2 seconds or
longer. The stations with good reception are
stored automatically to the preset channels.

Preset scan

Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Touch the screen to display the menu, then
touch [LIST] key.
2. Touch the [PS] key to start preset scan. The
unit starts scanning each station for 7
seconds sequentially.
3. When the desired channel is received, touch
the [PS] key again.
Setting the TV diver
∗ This function is enabled only when the panel is
open.
∗ Normally use the TV diver with the "ON" position.
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Touch the screen to display the menu, then
touch [SUB] key.
2. Touch the [TV DIVER] key to set the selected
reception setting.
G ON:
Sets reception emphasizing the visual.
G OFF:
Sets the diver setting to OFF.
3. Touch the [RTN] key to return to the previous
mode.
52
VRX848RVD/VRX743R
Setting the TV area
∗ This function is enabled only when the panel is
open.
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Touch the screen to display the menu, then
touch the [SUB] key.
2. Touch the [TV AREA] key to display a list of
country name.
3. Touch the [COUNTRY NAME] key to select a
desired country.
4. Touch the [RTN] key to return to the previous
mode.