Am/fm stereo cd player with cd changer control (19 pages)
Summary of Contents for Clarion CX501E
Page 1
Owner’s manual Mode d’emploi Bedienungsanleitung Istruzioni per l’uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Instrukcja użytkownika Εγχειρίδιο κατόχου CX501E ® 2-DIN Bluetooth CD/USB/MP3/WMA RECEIVER ® LECTEUR CD/USB/MP3/WMA Bluetooth 2 DIN ® Bluetooth -CD/USB/MP3/WMA-RECEIVER, 2-DIN ® SINTOLETTORE CD/USB/MP3/WMA Bluetooth a 2 DIN ®...
Page 2
APPARATET BØR KUN ÅBNES AF FAGFOLK MED SÆRLIGT KENDSKAB TIL APPARATER MED LASERSTRÅLER! Indvendigt i apparatet er anbragt den her gengivne advarselsmækning, som advarer imod at foretage sådanne indgreb i apparatet, at man kan komme til at udsaætte sig for laserstråling. CX501E...
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
Bluetooth SIG, Inc. and any Therefore, do not leave them for a long time use of such marks by Clarion Co.,Ltd. is in the car. under license. Other trademarks and trade • Never stick labels on the surface of the names are those of their respective owners.
• AF function on and off. broadcast during a TA interrupt. • Press and hold (1 sec.) for REG function on and off. [PTY] button [PTY] button • Press to cancel a PTY broadcast during a • PTY mode on and off. PTY interrupt. CX501E...
• When replacing the battery, insert properly, with +/– polarities oriented correctly. • Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery. • Dispose of used batteries properly. CX501E...
∗ The factory default setting is “THROUGH”. MID<F> : The factory default setting is “500”. (Adjustment range: 500/1K/2K) MID<Q> : The factory default setting is “1”. (Adjustment range: 0.7/1/1.4/2) TREBLE<G>:The factory default setting is “0”. (Adjustment range: +7 to – CX501E...
Page 10
“THROUGH” ↔ “60” ↔ “90” ↔ “120” ∗ The factory default setting is “THROUGH”. Note: • During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode. CX501E...
1 second or longer, local seek engaged and the unit starts storing stations. tuning will be enabled. Broadcast stations with good reception sensitivity are selected. Manual tuning Press the [x] or [v] button to manually tune a station. CX501E...
2. Press the [x] or [v] button to select ● Cancelling the TA standby mode “REG”. As “TP” and “TA” lit in the display, press the [TA] button. The “TA” in the display goes off and the TA standby mode is cancelled. CX501E...
[DIRECT] buttons (2 sec.), the selected PTY ● Cancelling a PTY interrupt broadcast is stored into that preset channel memory. Press the [SOURCE] button during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode. CX501E...
Page 14
During a TA, Alarm or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0 to 33). ∗ When the TA, Alarm or PTY interrupt ends, the volume returns to the level it had before the interrupt. CX501E...
] button to pause play. ● Folder structure “PAUSE” appears in the display. 1. A disc with a folder having more than 8 2. To resume CD play, press the [ ] button hierarchical levels will be impossible. again. CX501E...
● To cancel play 1. Press the operating button previously selected. ∗ The various play mode is canceled and the various play off mode appears in the display for 2 seconds. CX501E...
∗ When you switch to the secret call mode, you “BT TEL” ↔ “BT AUDIO” ↔ “– –:– –” ∗ The connected device name will appear in the will not hear the call from set and only can hear it from your mobile phone. display. CX501E...
Page 18
5 mobile phones. ∗ After completing settings, press the [DISP] button to return to the previous mode. 5-1. Press and hold the [ROTARY] knob (1 sec.) to connect. Connected device will be able to use all the functionalities provided. CX501E...
Page 19
3-2. Press the [ROTARY] knob again to stop the receiving of the phone NO. and the “CANCEL” will appear in the display for 2 sec. and then the “CANCEL ED” will appear in the display for 1 sec. Then it returns to the “ADD PHONE” mode. CX501E...
Page 20
Connection can be established at any source mode. ∗ The factory default setting is “OFF”. 2-1. Select “AUTO CON”. 3-1. Turn the [ROTARY] knob to select “ON” or “OFF”. ON: Automatic connection is enabled. OFF: Automatic connection is disabled. CX501E...
Operations Common to Each Mode ● Setting the anti-theft function (CATS) To change adjustment setting “CATS” is the acronym of “Clarion Anti-Theft System”. When you set a PIN code (called as 1. Press and hold the [DISP] button (1 sec.) “Personal Code”), a theft is prevented by...
“RESET” appears in the display, then the ∗ The factory default setting is “OFF”. unit will be restarted automatically and the 2-1. Select “BLINKLED”. memory will be cleared. 3-1. Turn the [ROTARY] knob to select “ON” or “OFF”. CX501E...
Page 23
∗ The factory default setting is “MID”. 1. Press and hold the [DISP] button (1 sec.). 2. Select “AUX SENS”. 3. Turn the [ROTARY] knob to select “HIGH”, “MID” or “LOW”. Note: • When AUX mode is selected, AUX IN sensitivity can be set. CX501E...
• Do not leave a USB memory device MP3/WMA files. For details, see the section unattended in an automobile. Exposure to “MP3/WMA” (page 15). direct sunlight or high temperatures may cause deformation or other malfunction of the USB memory device. CX501E...
Page 25
USB mode is selected, since it may result in loss or damage to data on the USB memory device. Always backup and save important data on your computer. 2. Remove the USB memory device from the USB connector. CX501E...
“iPod menu mode” for selecting tracks. • Some iPod models do not support this function. Switch between these modes by pressing the Consult your nearest Clarion dealer or website to [BAND] button for 1 second or longer. confirm which models do not support this Note: function.
[ROTARY] knob to select the desired subfolder. ∗ When the track name display is showing, pressing the [x] button will return to the currently playing folder name display. 7. Turn the [ROTARY] knob to select a track within a category. CX501E...
Page 28
3. When the track name display is showing, press the [ROTARY] knob. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled. ∗ Turn the [ROTARY] knob to select a track within a category. CX501E...
Let dry for about 1 hour with the power on. directly after the internal lens when the car power is turned is parked in a humid place. Wrong filename File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file system. CX501E...
Do not support the HUB Do not use the HUB devices. devices. If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. CX501E...
OPP (Object Push Profile) Phone Book A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) PBAP (Phone Book Access Profile) Send/Receive Sensitivity: Class 2 Note: • Specifications and design are subject to change without notice for further improvement. CX501E...