Cleaning And Maintenance; Auto Mode; Body Of The Appliance - Philips AC4002 User Manual

English
14
Fan speed light HOUR light
1 1hr
2 4hrs
3 8hrs
AC4072-4074_um_120424.indd
adjust the sensitivity of the air quality sensor. When it is set to a higher
sensitivity level, the appliance already starts cleaning the air at lower
pollution levels to make the air even cleaner.
There are 3 sensitivity levels:
- - standard extra sensitive
- - sensitive sensitive
- - extra sensitive standard
The pollution sensor is set to standard sensitivity. You can adjust the The air quality sensor is set to standard sensitivity. You can adjust the
sensitivity of the air quality sensor in the following way: sensitivity of the air quality sensor in the following way:
1 1 If the appliance is already plugged in, unplug the appliance and wait If the appliance is already plugged in, unplug the appliance and wait
for a few minutes. for a few minutes.
2 2 Press the AIR QUALITY button and simultaneously put the mains Press and hold the TIMER button and simultaneously put the mains
plug in the wall socket. plug in the wall socket.
The appliance beeps twice and one of the fan speed lights flashes to The appliance beeps twice and one of the HOUR lights flashes to
,
show the current sensitivity level of the air quality sensor. show the current sensitivity level of the air quality sensor.
sensitivity level: sensitivity level:
3 3 Press the FAN SPEED button to adjust the sensitivity level of the air Press the TIMER button to adjust the sensitivity level of the air
quality sensor. quality sensor.
One of the fan speed lights flashes to show the set sensitivity level of One of the HOUR lights flashes to show the set sensitivity level of
,
the air quality sensor. the air quality sensor.
4 4 Press the on/off button to switch off the appliance. Press and hold the on/off button to switch off the appliance.
Note: When you change the sensitivity level, the appliance automatically starts Note: When you change the sensitivity level, the appliance automatically starts
operating at the set sensitivity level whenever you switch on the appliance. operating at the set sensitivity level whenever you switch on the appliance.

Cleaning and maintenance

Auto mode

When the appliance is switched on, the built-in air quality sensor
Always unplug the appliance before you clean it.
automatically measures the ambient air quality. When the auto mode is
Never immerse the appliance in water or any other liquid.
activated, the appliance selects the most appropriate fan speed for the
measured air quality.
Never use aggressive or flammable cleaning agents such as bleach or
alcohol to clean any part of the appliance. 1 Press the on/off button to switch on the appliance.
Only the pre-filter is washable. All other filters are NOT washable.

Body of the appliance

Regularly clean the inside and outside of the body to prevent dust from
collecting on the inside and outside.
1 Wipe away dust with a soft dry cloth from the body of the appliance.
2 Clean the air inlet and the air outlet with a soft dry cloth.
Pre-filter
The pre-filter is washable.
14
Sensitivity level Sensitivity level
extra sensitive extra sensitive
sensitive sensitive
standard standard
24/04/2012 15:47:32