Cleaning And Maintenance; Cleaning Schedule; Cleaning The Body Of The Air Purifier; Cleaning The Particle Sensor - Philips AC3055/51 User Manual

5

Cleaning and maintenance

Note:
• Always unplug the appliance before you clean it.
• Never immerse the appliance in water or any other liquid.
• Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any
part of the appliance.
• Never use any liquids (including water) to clean the filter.
• Do not attempt to clean the particle sensor and gas sensor with a vacuum cleaner.

Cleaning schedule

Frequency
When necessary
Every two months
The displays on the
screen.
Cleaning.the.body.of.the.air.purifier
Regularly clean the inside and outside of the air purifier to prevent dust from collecting.
1
Use a soft, dry cloth to clean both the interior and exterior of the air purifier.
2
The air outlet can also be cleaned with a dry, soft cloth.

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the appliance.
Note:
• If the air purifier is used in a dusty environment, it may need to be cleaned more often.
• If the humidity level in the room is very high, condensation may develop on the particle sensor and
the air quality light may indicate a more poor air quality even though the air quality is actually good.
If this occurs, clean the particle sensor.
1
Switch off the air purifier and unplug from the power socket.
2
Pull the back cover and remove it from the appliance (fig
3
Clean the particle sensor with a damp cotton swab (fig
4
Dry all parts thoroughly with a dry cotton swab.
5
Reattach the back cover (fig
Cleaning method
Wipe the surface of the appliance with a soft dry cloth
Clean the air outlet cover
Clean the particle sensor with a dry cotton swab
Clean the surface of the filter
).
g
).
c
).
v
EN
9