Troubleshooting - Maytag MEC7430W User Manual

Troubleshooting

32
Problem Possible cause
Wash programme
Unclean dishes
unsuitable for the load.
Spray arm unable to rotate.
DishDrawer® overloaded/
incorrectly loaded.
Filter plate/drain filter is
incorrectly inserted.
Detergent put in the
wrong compartment of the
dispenser.
Excess food not removed
from dinnerware prior to
loading.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are blocked. Clean the spray arm.
Filter plate/drain filter is
blocked.
Foaming Incorrect amount of
detergent.
Too much egg in the wash
load.
Rinse aid setting too high.
Water leaking Drain hose disconnected
from waste pipe.
Water inlet hose not
properly connected.
Other leaks.
DishDrawer® will Childlock feature is on or
not open the Closed drawer option is
on, or both.
Power failure
during cycle
What to do
See section 'Wash programmes and
detergent quantities' for a suitable wash
programme, or the soils were too heavily
baked on and dishes may need soaking.
Ensure no items are obstructing the spray
arm path.
Refer to the section on loading.
See section 'User maintenance instructions'
Detergent for the main wash must be placed
in the large compartment. See section
'Detergent dispenser' for information.
Scrape all food scraps off dinnerware prior to
loading.
Use recommended brands of dishwasher
detergent.
See section 'Wash programmes and
detergent quantities' or follow the detergent
manufacturer's instructions.
Clean the filter plate and drain filter.
See section 'Wash programmes and
detergent quantities' or follow the detergent
manufacturer's instructions.
Increase the amount of detergent.
Decrease the rinse aid setting.
Reconnect the drain hose to the waste pipe.
Ensure the inlet hose is connected securely.
Turn water and power supplies to the
DishDrawer® off. Call your dealer or
Authorised Service Centre.
Turn the Childlock off. Hold down the
button until the symbol disappears from
the LCD screen or the light above the
button disappears and/or press the
button to open the DishDrawer®.
Wait until power resumes, cycle will restart in
same part of wash programme.
/
/
/