The Control Panel - Defy AUTODRY Owner's Manual

THE CONTROL PANEL

1
1. Drying guide
•
The guide is indicative of the types of fabric that should be dried on the HOT
(normal) or Warm (delicate) drying cycles.
2. Hot / Warm selection button
•
This button knob allows the selection of High (HOT) or Low (WARM)
drying cycles.
•
We recommend that a hot cycle be used for normal wash loads and a warm
cycle for delicate articles.
•
If the button is not pressed the machine will operate on a HOT cycle.
•
If the button is pressed in, the machine will operate on a warm cycle.
•
There is an automatic 10 minute cooling down period at the end of each
drying cycle.
3. Power On / Off button
•
Pushing the button will start the machine but only if a time cycle has been
selected.
•
Pushing the button again will switch the machine off.
4. Timer knob
•
Turn the knob clockwise only to select the required drying period.
•
If the required setting is accidentally bypassed, do not turn the knob
back but continue turning clockwise to the desired setting.
5. Indicator light
This light indicates that the machine is switched on.
The Door
•
To open the door, pull on the handle.
•
Opening the door, during the drying cycle, will stop the machine.
•
Closing the door will allow the machine to complete the drying cycle.
2
1. Drying guide
2. Hot / Warm selection button
3. Power ON / OFF button
4. Timer knob
5. Indicator light
3
3
Clockwise
4 5
Turn timer
knob
only