Introduction; Installation - Defy AUTODRY Owner's Manual

INTRODUCTION

You are now the proud owner of one of the finest and most modern tumble dryers that
today's technology can produce. You and your Autodry are going to make a great
team together. But first it will pay if you really get to know each other. This book will
tell you all you need to know about your machine, what it will do and how to do it.
Please read all the instructions carefully before operating the machine.

INSTALLATION

Floor Standing
•
Remove all packaging.
•
The tumble dryer should be placed in a well-ventilated area. If the Dryer is
operated in a confined space, moisture extracted from the clothing during the
drying process will condense on the walls.
•
The rear of the Dryer must be free of any restrictions, especially round the fresh
air grille. Do not position the Dryer near any long curtains or drapes as these
could be drawn against the air intake grille. This would result in a much longer
drying time.
•
Allow a 100 mm. Air gap at the rear of the Dryer for ventilation purposes.
The appliance must be earthed and the manufacturer and seller do not accept
responsibility for any damage due to incorrect electrical connection.
Electrical
•
The dryer is designed to operate on a 230 volt, 50 Hz, 15 Amp, AC power supply.
•
The power cord has a 15 Amp moulded plug attached.
•
This plug should be pushed into a 15 Amp earthed wall.
•
If the power cord should ever need replacing, use only a genuine cord available
from the nearest Defy Service Centre.
2