The Control Panel - Defy autodry Owner's Manual

THE CONTROL PANEL

1
1 Drying guide
The guide is indicative of the types of fabric that should be dried on the HOT
•
(normal) or Warm (delicate) drying cycles.
2 Hot / Warm selection button
This button knob allows the selection of High (HOT) or Low (WARM) drying cycles.
•
We recommend that a hot cycle be used for normal wash loads and a warm cycle for
•
delicate articles.
If the button is not pressed the machine will operate on a HOT cycle.
•
If the button is pressed in, the machine will operate on a warm cycle.
•
There is an automatic 10 minute cooling down period at the end of each drying cycle.
•
3 Power On / Off button
Pushing the button will start the machine but only if a time cycle has been selected.
•
Pushing the button again will switch the machine off.
•
4 Timer knob
Turn the knob in a clockwise direction only to select the required drying period.
•
If the required setting is accidentally bypassed, do not turn the knob back but continue
•
turning clockwise to the desired setting.
5 Indicator light
This light indicates that the machine is switched on.
The Door
To open the door, pull on the handle.
•
Opening the door, during the drying cycle, will stop the machine.
•
Closing the door will allow the machine to complete the drying cycle.
•
2
1. Drying guide
2. Hot / Warm selection button
3. Power ON / OFF button
4. Timer knob
5. Indicator light
3 4 5