Kenmore 116.32189 Owner's Manual page 9

Telescoping
Wand
Remove the
telescoping
wand from
its storage
position.
Remove the crevice tool from its storage
position in the wand. Turn the locking ring to
the UNLOCK position. Extend the wand to
its full length. Turn the locking ring to the
LOCK position° Attach the extension wand
onto the open end of the hose
TO OPERATE SUCTION CONTROL
SLIDE
TELESCOPING WAND
When using attachments for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This slide is located on
the telescoping wand, close to the hose.
This will reduce suction for ease of
cleaning
L owe_-,._ Wand
\, Un_ock"',_ Z" Upper
"_ Wand
Align the tabs on the extension wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock_
To achieve maximum reach wilh the attach-
ments, add the crevice tool to the end of the
wand by inserting and twisting slightly.
.o. I!!..
Cot,fro/
_
!1F_..Y f .4
St/de ,I_" _ ,, ,_"_/ / /
Tefescopin£/
@
The dusting brush and the upholstery tool
may .be attached directly to the wand or
placed on the crevice tool for additional
reach,
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach
beyond the hose stretch capability
could cause the cleaner to tip over,
Suction
Control
Slide
NOTE:
Return the
suction con-
trol slide to
the closed
position for
normal clean-
ing_
9