LG LCE30845 Owner's Manual page 15

OPERAliN6 iNslRUcliONs
SETTING THE cONTROLS
SETTING THE POWER LEVEL
The power level for the selected cooking Zone
can be set from N to _ and _ (Boost).
To adjust the power level:
O Touch the F_ or [] pad for the selected
Cooking Zone.
Touching [] will set the power level to N.
Touching [] will set the power level to N.
Touch the [] or [] pad of the selected
Cooking Zone to increase or decrease the
power level.
If power level _ is selected, the Cooking
Zone will turn off after 5 seconds.
O For faster power level adjustments, touch
and hold the [] or [] pads until the
desired setting is reached.
NOTE: Normal power
settings range in 1/2 step
increments for power
levels from 2 to 6 to
allow precision cooking.
A dot will appear next to
the number to indicate a
1/'2 power level step.
NOTE:
,, If the cookware or pan is moved from the
center of any active Cooking Zone for any
reason, a sensor will detect this and the
Cooking Zone will no longer heat. The display
for that Cooking Zone will flash the last power
level setting for the Cooking Zone.
,, The Cooking Zone will remember the power
level setting for up to 90 seconds before the
Cooking Zone will automatically shut off.
WARNING
Your cooktop has a residual heat indicator []
for each Cooking Zone. This indicator will warn
that this area has been used and is still giving
off enough heat to cause burns.
Avoid touching the burner when this
indicator is shown. Although the cooktop
is OFF, the [] will stay lit until the
cooktop has cooled down,
If the Cooking Zone _1 or [] pads are held
for more 10 seconds, the timer display will
show the error message _. To clear this
error message, press the ON/OFF pad for
the Cooking Zone you were setting. This
message does NOT relate to the timer pad.
To turn off the cooking zone:
Once cooking is complete, touch the
ON/OFF pad to turn the cooking zone OFF.
The corresponding cooking zone display witll
turn off.
_lf the POWER pad is touched instead of
ON/OFF, the entire cooktop will turn off.