Adjusting The Shock Absorber Assembly; Specifications - Yamaha YZF-R6S(C) Owner's Manual

Compression damping force
1. Compression damping force adjusting screw
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
on each fork leg in direction (a). To de-
crease the compression damping force
and thereby soften the compression
damping, turn the adjusting screw on
each fork leg in direction (b).
Compression damping setting:
Minimum (soft):
9 click(s) in direction (b)*
Standard:
7 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
NOTE:
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
3-17
ECA10100
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring and rebound and compression
damping force adjusting screws.
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
Spring preload
1. Spring preload adjusting ring
2. Special wrench
3. Position indicator
EAU15051
ECA10100
3