Tachometer - Yamaha YZF-R6S(C) Owner's Manual

Engine trouble warning light "
This warning light comes on or flashes
when an electrical circuit monitoring the
engine is defective. When this occurs,
have a Yamaha dealer check the self-
diagnosis system. (See page 3-6 for an
explanation of the self-diagnosis de-
vice.)
The electrical circuit of the warning light
can be checked by turning the key to
"ON". If the warning light does not come
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.
Shift timing indicator light
This indicator light can be set to come
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next higher
gear.
The electrical circuit of the indicator
light can be checked by turning the key
to "ON".
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
INSTRUMENT AND CONTROL FUNCTIONS
EAU11530 cuit. (See page 3-6 for a detailed expla-
"
nation of the function of this indicator
light and on how to set it.)
EAU11571

Tachometer

1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
CAUTION:
Do not operate the engine in the ta-
chometer red zone.
Red zone: 15500 r/min and above
3-5
EAU11872
3
ECA10031