Trip display
When the engine start switch is turned to
OFF, the last display shown is shown first
when the engine start switch is turned to ON
again.
NOTE:
• Since "Display 1" and "Display 2" are the
only default displays, other displays can-
not be switched.
• To change the display configuration, see
"Display (setting displays)" in "Changing
settings (custom mode)."
Trip display (optional: speed sensor has
been installed)
TRIP shows the information from the speed
sensor converted to the distance traveled.
+
(1 second): To reset the dis-
tance traveled.
NOTE:
• The distance traveled is affected by cur-
rents and other operating conditions and
may differ from the actual distance trav-
eled.
• You can select to show miles (M), nautical
miles (NM), or kilometers (km) on the
TRIP display. To change the displayed
unit, see "UNIT (setting displayed units)"
in "Changing settings (custom mode)."
51