Clock (Optional: Gps Has Been Installed); Changing Backlight Settings - Yamaha 6Y8- 2819U-00 Owner's Manual

Clock/Changing backlight settings

Clock (optional: GPS has been installed)

The clock shows the time in 12 hours. The
local time is easily displayed by calculating
the longitude information received from the
GPS communication data. Set the time as
necessary.
Setting the time:
1. : To activate the time setting mode
and switch to the time setting display.
Blinks
2. : To change the minutes. Press
and hold to advance quickly.
3. : To set the hours.
4. : To change the hours. Press and
hold to advance quickly.
5. : To set the time and return to the
normal display.
Resetting the time:
1. : To activate the time setting mode
and switch to the time setting display.
2. + (1 second): To reset the
time to "0:00" and return to the normal
display.

Changing backlight settings

You can turn the backlight on or off, or
change the brightness level of the backlight
for all meters collectively. You can also
change the settings for each meter individu-
ally.
NOTE:
The backlight setting procedure is the same
as that of the tachometer unit. To change
the backlight settings, see "Changing back-
light settings" in "1. Tachometer unit."
55