Clock (Optional: Gps Has Been Installed); Trip Display (Optional: Speed Sensor Has Been Installed); Changing Backlight Settings - Yamaha 6Y8-2819V-00 Owner's Manual

Clock/Trip display/Changing backlight settings

Clock (optional: GPS has been installed)

The clock shows the time in 12 hours. The
local time is easily displayed by calculating
the longitude information received from the
GPS communication data. Set the time as
necessary.
Setting the time:
1. : To activate the time setting
mode and switch to the time setting dis-
play.
Blinks
2. : To change the minutes. Press
and hold to advance quickly.
3. : To set the hours.
4. : To change the hours. Press and
hold to advance quickly.
5. : To set the time and return to the
normal display.
Resetting the time:
1. : To activate the time setting mode
and to switch to the time setting display.
2. + (1 second): To reset the
time to "0:00" and return to the normal
display.
Trip display (optional: speed sensor has
been installed)
TRIP shows the information from the speed
sensor converted to the distance traveled.
+ (1 second): To reset the dis-
tance traveled.
NOTE:
• The distance traveled is affected by cur-
rents and other operating conditions and
may differ from the actual distance trav-
eled.
• You can select to show miles (mile), nauti-
cal miles (nm), or kilometers (km) on the
TRIP display. To change the displayed
unit, see "01 (setting displayed units)" in
"Changing settings (custom mode)."

Changing backlight settings

You can turn the backlight on or off, or
change the brightness level of the backlight
for all meters collectively.
NOTE:
The backlight setting procedure is the same
as that of the tachometer unit.
To change the backlight settings, see
"Changing backlight settings" in "1. Tachom-
eter unit."
23