Yamaha 6Y8- 2819U-00 Owner's Manual page 63

Changing the display configurations:
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. : To switch to the change settings
display.
4. : Press to switch between the dis-
play numbers. Select the display num-
bers (1–5) you want to change. The first
two digits in the speedometer display
show the display numbers.
5. : To select the display configura-
tion numbers (0–36) you want to
change. The fuel level display segments
(the left column represents the tens digit
and the right column represents the
ones digit) show the display configura-
tion numbers. Press to switch between
the display configuration numbers.
DISPLAY (setting displays)
* In the display example, the display num-
ber 3 and the display configuration num-
ber 36 are shown.
* When the display configuration number 0
is selected, "HIDDEN" is shown and the
display is not shown.
6.
configuration and return to the custom
mode selection display.
7.
mal mode.
NOTE:
When changing two or more display config-
urations of the multifunction display, repeat
steps 4 and 5.
Resetting the display configuration default
settings:
1. Turn the engine off and the engine start
switch to ON.
2.
tom mode.
3.
display.
4.
display configurations to the default set-
tings and return to the custom mode
36
selection display.
58
(1 second): To change the display
(1 second): To return to the nor-
(4 seconds): To activate the cus-
: To switch to the change settings
+ (1 second): To reset the