(Setting Fuel Tank Capacity) - Yamaha 6Y8- 2819U-00 Owner's Manual

TTL
You can select to show gallons (G) or liters
(L).
The default setting is gallons (G).
ECON
You can select to show miles per gallon
(MPG), nautical miles per liter (NM/l), or kilo-
meters per liter (km/l).
The default setting is miles per gallon
(MPG).
7. (1 second): To change the dis-
played units and return to the custom
mode selection display.
8. (1 second): To return to the nor-
mal display.
NOTE:
When the fuel flow unit settings are
changed, the TTL, ECON, and AVAL unit
settings are collectively changed automati-
cally. To change the settings for each dis-
played unit individually, repeat steps 5 and
6.
TANK CAPA. (setting fuel tank capacity)
TANK CAPA. (setting fuel tank capacity)
You can set the capacity of the fuel tank that
is connected to this meter.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. (2 times):
between the setting function names.
4. : To switch to the change settings
display.
Blinks
5. : Press to switch between the
selected digits.
: Press to switch between the
selected digit numeric values.
6. (1 second): To change the capac-
ity of the fuel tank and return to the cus-
tom mode selection display.
7. (1 second): To return to the nor-
mal display.
44
Press to switch