Resetting Custom Mode; Display (Setting Displays) - Yamaha 6Y8- 2819U-00 Owner's Manual

NOTE:
• If no operations are carried out for 30 sec-
onds or more or if the engine is started,
the settings will not be applied and the
display returns to the normal display.
• Press the button for 2 seconds from
step 5 to change the settings and return to
the normal display.

Resetting custom mode

In the custom mode, you can reset the
default settings collectively for all settings
that have been changed.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. + (10 seconds): To reset all
settings to the default settings.

DISPLAY (setting displays)

DISPLAY (setting displays)
You can change the display configuration of
the normal display. There are a total of 15
combinations of which up to four displays
can be set up.
The display configuration number that has
been selected as the default display config-
uration is indicated
area in the table below.
0 —
1
2
3
4
—
5
—
6
—
7
—
8
—
9
—
10
11
—
12
—
13
—
14
—
15
: Displayed
Changing the display configurations:
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
30
by the shaded
— — —
— —
— —
— —
— — —
—
—
— —
—
— —
— —
— — —
— —
— —
— —
— — —
—
—
—
—
—
—
—
—
—
—
—