Operation
EMU28101
Procedure
1.
Place the gear shift lever in neutral and
face the outboard motor forward.
2.
Slightly tilt the outboard motor up until
the tilt support bar automatically turns to
the lock position to support the engine.
3.
To lower the outboard motor to the nor-
mal running position, first slightly tilt the
outboard motor up. Then pull up the tilt
support bar lever and slowly tilt the en-
33
ZMU02697
N
ZMU02682
ZMU04542
gine down.
NOTE:
The outboard motor is equipped with 2 or 3
positions for shallow water cruising.
EMU28192
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged with salt de-
posits.
NOTE:
For cooling system flushing instructions, see
page 35.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(not available for some models) if you use
the outboard motor in turbid or muddy water
conditions.
ZMU02673