Operation
3.
If you are using an external fuel tank,
connect the fuel joints securely and
squeeze the primer pump with the outlet
end up until you feel it become firm (if
equipped the fuel joint).
23
ZMU02681
EMU27490
Starting engine
EMU30860
Manual start models (tiller control)
1.
Place the gear shift lever in neutral.
ZMU02680
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2.
Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then install the lock plate on
the other end of the lanyard into the en-
gine stop switch.
ZMU02679
EWM00120
WARNING
Attach the engine stop switch lanyard
G
to a secure place on your clothing, or
your arm or leg while operating.
Do not attach the lanyard to clothing
G
that could tear loose. Do not route the
ZMU02894
N
ZMU02682