Forward (Tiller Handle And Remote Control Models); Reverse; Stopping Engine; Procedure - Yamaha F4 Owner's Manual

EMU27764
Forward (tiller handle and remote
control models)
Tiller handle models
1. Place the throttle grip in the fully closed
position.
2. Move the gear shift lever quickly and
firmly from neutral to forward.
N
Remote control models
1. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to
forward.
EMU27801

Reverse

EWM00190
WARNING
When operating in reverse, go slowly. Do
not open the throttle more than half. Oth-
erwise the boat could become unstable,
which could result in loss of control and
ZMU02685
F
ZMU02687
an accident.
1. Place the throttle grip in the fully closed
position.
2. Move the gear shift lever quickly and
firmly from neutral to reverse.
N
R
NOTE:
The outboard motor can turn 360° in its
bracket (full-pivot system). The boat can also
be backed up by simply turning the outboard
motor around 180° with the steering handle
facing toward you.
EMU27820

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27832

Procedure

1. Push and hold the engine stop button
Operation
ZMU02685
ZMU02688
26