Installation; Installation In Windows; Installing The Korg Usb-Midi Driver - Korg PS60 User Manual

Installation

Installation in Windows

To install the PS60 Editor and the PS60 Plug-In Editor into Windows XP, Windows Vista, or
Windows 7, proceed as follows.
If you want to connect the PS60 to your computer via USB and use the PS60 Editor and the
PS60 Plug-In Editor, you must install the Korg USB-MIDI Driver. (Refer to the Installation
Guide for details on how to install the Korg USB-MIDI Driver.)
1
Insert the included CD-ROM into your computer's CD-ROM drive.
Normally the "PS60 Application Installer" will start up automatically.
If your computer is set so the installer does not run automatically, double-click
"KorgSetup.exe" on the CD-ROM.
2
From the list, select the applications that you want to install, and click [Install].
The applications you selected will begin the installation process.
3
Follow the on-screen directions to install the desired applications, such as PS60 Editor.
4
When you've finished installing all the selected software, close the installer.

Installing the Korg USB-MIDI Driver

Refer to the Installation Guide for details on how to install the Korg USB-MIDI Driver.
2