Table of Contents
Advertisement
– High temperature, high humidity, or direct sunlight
– Excessive vibration, sudden shock, or inclined surface
– Excessive dust
Loading a DVD or CD
1. Press the Eject button. The tray slides out of the drive.
2. Place the disc in the tray with the label facing up.
3. Close the tray by gently pushing the tray in until it latches.
Attention: Do not use force or insert foreign objects to open the tray. If your tray does
not open when you press the Eject button, see "Manually ejecting a DVD or CD" for
more information.
Manually ejecting a DVD or CD
If you press the Eject button and the tray does not slide out, turn off the
computer and straighten a large paper clip to form a tool, as shown in the
illustration. The straightened end must extend at least 45 mm (1.8 in.). Insert
the extended end into the manual-eject hole on the front of the drive. Push the
paper clip until the tray opens. Gently pull out the tray until you can remove
the disc.
Using DVD
To use DVD, you need to set up your computer as follows after installing the
CD-RW/DVD drive into the Ultrabay 2000 drive bay:
45 mm
1.8 in
About the CD-RW/DVD Combination Ultrabay 2000 Drive (Translate)
2-5
Advertisement
Table of Contents
