Table of Contents
Advertisement
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATATI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using
the ThinkPad A21e.)
7. Select the DMA is available as the Transfer Mode.
8. Click OK.
9. Click Close to close "System Properties" window. A message appears,
informing you that the system settings have changed.
10. Click OK to restart the system.
Installing DVDExpress
To install DVDExpress, do the following:
1. Insert the DVD Software CD-ROM into the CD-RW/DVD drive.
2. Click Start and Run.
3. Type x:\DVDPLAYR\SETUP.EXE and click OK, where x represents the drive
letter of the DVD drive.
4. Follow the instructions on the screen.
Viewing a DVD movie
After you install the CD-RW/DVD drive and DVDExpress, you can view a
DVD movie. You first need to set the DVD region code for your DVD content,
however.
DVD region codes
Regional coding is part of the scheme for protecting the contents of a DVD.
The world is divided into six regions so that specific content can be viewed
only in the region where it is appropriate. For example, content for Region 1
(U.S. and Canada) can be viewed only in Region 1. DVDExpress is also
region–specific.
You can verify the region code of the content by looking at the region code
symbol on the back of the content packaging.
Table 1-1.
Region code
1
2
3
4
Region
U.S., Canada
Europe, Middle East, South Africa, Japan
Southeast Asia, Taiwan, Korea
Latin America, Australia, New Zealand
Part 1. About the CD-RW/DVD Combination Ultrabay 2000 Drive
1-7
Advertisement
Table of Contents
