Enabling The Dma Setting - IBM ULTRABAY 2000 User Manual

1. Enable the DMA setting (Windows 98, Windows 95, and Windows 2000
users only).
2. Install DVDExpress
Note: If you are reinstalling Windows NT 4.0, you need to install the IDE
driver. To check whether the IDE drive is installed, double-click
SCSI Adapter in the Control Panel; then make sure the ThinkPad
PIIX4 IDE Driver appears in the Driver window.
Notes:
1. Under Windows NT, the ThinkPad A21e cannot play back the contents of a
DVD.
2. For Windows 95, the DVD movie player is supported by Windows 95
OSR2.0 or later versions. You can check which version of Windows 95 you
are using by doing the following:
a. Click Start, move the cursor to Settings, and then click Control Panel.
b. Double-click System.
Read the numbers under "System".
v 4.00.950B means that your version is Windows 95 OSR2.0 or OSR2.1.
v 4.00.950C means that your version is Windows 95 OSR2.5.

Enabling the DMA setting

This section applies to Windows 95, Windows 98, and Windows 2000. Go to
the appropriate section:
v "For Windows 95 and Windows 98"
v "For Windows 2000" on page 2-7
For Windows 95 and Windows 98
1. Click Start, move the cursor to Settings, and click Control Panel.
2. Double-click System.
3. Click Device Manager.
4. Double-click the CDROM icon. The CD-RW/DVD drive name appears
under the CDROM icon.
5. Double-click the drive name.
6. Click the Settings tab.
7. Check the DMA and Auto insert notification check boxes. If the alert
dialog appears, click OK to close it.
8. Click OK.
9. Click Close to close the "System Properties"window. A message appears,
informing you that the system settings have changed.
10. Click OK to restart the system.
2-6
®
ThinkPad CD-RW/DVD Combination Ultrabay
™
(the DVD movie player program).
™
2000 Drive User's Guide