Table of Contents
Advertisement
8 - 14
5. Lift the DSA assembly straight up from the transport area.
6. Rotate the DSA assembly away from you. The mounting
brackets should be pointing straight down toward the transport
area.
7. Set the DSA assembly down, using the mounting brackets for
support.
DSA Window
Mounting
Bracket
8. Grasp the quarter-turn screws and turn each counterclockwise one-
quarter turn to loosen the DSA window panel.
9. Remove the DSA window panel by pulling it gently toward you.
The DSA lamp will be exposed.
CAUTION: Allow the DSA lamp to cool before attempting to remove
it for replacement.
10. Grasp the lamp by both ends.
11. Rotate the lamp toward you until it becomes loose. Gently remove
the lamp from its housing.
Lens
Transport Window
A-41069
January 1993
Advertisement
Table of Contents
