Kodak i1800 Series Key Operator's Manual page 6

SCANNER ORIENTATION
You will now have a demonstration of the scanner using the Count Only mode and the instructor
will point out the basic components of the Kodak i1800 Series Scanner.
There are two power switches, but the main power switch on the back of the scanner will rarely
be used.
Main power
switch
Front view
Power switch
1
2 Input elevator
3 Input elevator extender
4 Input elevator side guides
5 Feed module
6 Paper present sensor
7 Gap release button
Have each student adjust the scanner to their personal height and scan a stack of documents in
Count Only mode.
A-61579 February 2007
Service K number
8
9 POD release
10 Output tray and end stop
11 Exit deflector
12 Front printer access cover
13 Rear printer access cover
14 Touchscreen
LED
15
16 Workspace table height adjustment switch
17 Height adjustment wire
18 Door with storage pocket inside
5