Specification; Rear Panel Connectors - Pace foxtel User Manual

Specification

Due to continued product improvement, this specification may change without notice.
General
Operating voltage:
Power consumption:
Weight:
Dimensions (W x H x D):
UHF modulator:
Operating temperature range:
Storage temperature range:

Rear panel connectors

240V 50 Hz
TELEPHONE LINE
VCR SCART
TV SCART
AUDIO R and L
S-VIDEO OUT
VIDEO OUT
DIGITAL AUDIO OUT
RS232
USB
AERIAL IN
RF OUT - 1
RF OUT - 2
OPTICAL AUDIO OUT
CABLE INPUT (Cable PDR)
INPUT 1 and 2 (Satellite PDR)
The EMC (Electro-Magnetic Compatibility) specification of the product is as follows:
FOXTEL Terms and Conditions are available on the FOXTEL website at www.foxtel.tv
You can also obtain a copy by calling 131999.
The product complies with the following safety standards:
- AS/NZS 60950
- AS/NZS 60065
- AS/NZS CISPR 13
- AS/NZS CISPR 22
The product complies with the following Telecoms standard:
- AS/ACIF S002
240V AC ± 15%; 50Hz
Cable PDR - 30 W (max.);
Satellite PDR - 35 W (max.)
4.5 kg (packed)
390mm x 62 mm x 265mm
CCIR PAL System B; Ch 21 to 69 (factory setting is 41)
0°C to +50°C
–25°C to +55°C
(Power input) IEC 320 2-pin reversible
RJ11 female
SCART (composite video in/out;
S-Video in/out; RGB in)
SCART (composite video out; RGB out; S-Video out)
Right and left phono (RCA) audio out
4-way mini-DIN
Phono (RCA) composite video out
Electrical S/PDIF phono (RCA) out
Serial connector 9-way D type
Single USB (1.1) Type A
IEC 169-2 female
IEC 169-2 male
IEC 169-2 male
Optical S/PDIF digital-audio out
IEC 169-24 F-type female
2 x IEC 169-24 F-type female
75