Picture Settings - Pace foxtel User Manual

Setup

Picture Settings

The standard (default) setting for each item is marked with *.
To confirm any changes, highlight 'Save New Settings' then press
select, or to cancel, press back.
If you press the red (Reset all settings) button, the settings will change
to the standard settings (NOT the settings made by your installer).
Item
Aspect ratio control
TV Type
(Only available if the
Aspect ratio control has
been set to 'By STU'.)
16:9 Programme
Display
(Setting for how
widescreen (16:9)
programmes display on
a standard (4:3) TV -
only available if the TV
Type has been set to
4:3)
Settings Comments
By TV, For most TVs you should set this to 'By STU' (by set-top unit), then
By STU * select your TV Type and Programme Display preference.
'By TV' allows your TV to control how the picture is displayed, provided
that your TV is capable of controlling the picture, and that your
FOXTEL PDR is connected to your TV via a SCART to SCART lead.
4:3 * Setting for 'standard' (4:3) TVs.
16:9 Setting for 'widescreen' (16:9) TVs.
Centre Cut * The centre portion only of any widescreen (16:9) transmissions will
display on a standard (4:3) TV.
14:9 You see a wider portion of a widescreen (16:9) transmission than with
'centre cut-out', but you do not see the entire picture. The picture does
not fill the screen.
Letter Box The whole of any widescreen transmissions will display on a standard
(4:3) TV, but the picture does not fill the screen.
55