Pace foxtel User Manual page 79

Solving problems
Problem
Your remote control
isn't working.
You can't use your
FOXTEL remote
control to operate
your FOXTEL PDR.
You've forgotten
your PIN.
You are having
difficulties using a
FOXTEL interactive
feature, such as
Active or Box Office.
74
Possible cause
Something is between
the remote control
and your FOXTEL
PDR.
The batteries are flat
or inserted the wrong
way round.
Your FOXTEL PDR
may be in 'loop-
through' mode
because you pressed
the av button (see
page 59).
Your FOXTEL PDR
may be in 'loop-
through' mode
because you pressed
the av button (see
page 59).
There may be a
problem with your
telephone line.
Suggested solution
Make sure you point your remote control directly at
your FOXTEL PDR and that nothing is between it
and your FOXTEL PDR. The ir receive light on
your FOXTEL PDR's front panel should flash each
time you press a remote control button.
Check the batteries and replace them if necessary.
If you want to watch digital TV, press FOXTEL on
your remote control to return to viewing FOXTEL.
If you want to watch digital TV, press FOXTEL on
your remote control to return to viewing FOXTEL.
Call your FOXTEL provider for advice.
Check that the telephone lead between your
FOXTEL PDR and the telephone point is properly
plugged in. (Always switch your FOXTEL PDR off
at the power supply before plugging or unplugging
any other equipment.)
Check that the telephone line is working by picking
up your telephone and listening for the tone.
Using your FOXTEL Personal Digital Recorder