For Your Safety - Pace foxtel User Manual

For your safety

Your FOXTEL PDR has been manufactured to meet international safety
standards. To obtain the best results and operate the FOXTEL PDR safely
it is important that you read the safety instructions below.
If you have any doubts about the installation, operation or safety of your
FOXTEL PDR, please consult FOXTEL.
WARNING!
Remember that contact with 240 V AC power can be lethal or
can cause a severe electric shock. To avoid this risk:
Never remove the top cover from your FOXTEL PDR as
there are high-voltage live parts inside. There are no user-
serviceable parts inside your FOXTEL PDR.
Make sure that all electrical connections are safe and
secure.
Do not connect any of your equipment (FOXTEL PDR,
TV, video recorder etc.) to the power supply until you
have properly connected all the other leads.
Disconnect your FOXTEL PDR from the power supply
(by disconnecting its power lead from the power point on
the wall) before you disconnect any other equipment
from its rear panel.
Never push anything into the holes, slots or other
openings of the FOXTEL PDR case (except your
FOXTEL Smartcard into its correct slot).
CAUTION!
✔ To ensure a free flow of air around the FOXTEL PDR, allow at least
10cm of space above and around the FOXTEL PDR.
✘ Never stand your FOXTEL PDR on soft furnishings or carpets. Do
not cover any ventilation slots.
✘ Do not place your FOXTEL PDR in an unventilated cabinet or on
top of a unit which emits heat (e.g. a TV).
✔ If the FOXTEL PDR is placed with other items of audio/video
equipment in a cabinet, make sure all items have sufficient space all
around them, to allow ventilation and prevent overheating.
✘ Do not stack items of audio/video equipment in a crowded space.
✘ Do not use or store your FOXTEL PDR in hot, cold, damp or dusty
places.
✘ Do not put anything on your FOXTEL PDR which might melt, drip
or spill into it. Never stand objects filled with liquids, such as vases,
on top of your FOXTEL PDR.
✘ Never place naked flame sources, such as lighted candles, on top of
your FOXTEL PDR.
✘ Do not pick up or otherwise move your FOXTEL PDR while it is
connected to the mains supply. If you want to move your FOXTEL
PDR, first disconnect it, then wait at least 30 seconds before
continuing.
2
Using your FOXTEL Personal Digital Recorder