Audio And Language Settings - Pace foxtel User Manual

Setup

Audio and Language Settings

The standard (default) setting for each item is marked with *.
To confirm any changes, highlight 'Save New Settings' then press
select, or to cancel, press back.
If you press the red (Reset all settings) button, the settings will change
to the standard settings (NOT the settings made by your installer).
Item
Audio output
Background music
Incorrect PIN signal
SPDIF Output
Preferred Language
Settings Comments
Stereo *, Mono Controls the audio output on the SCART
lead.
On *, Off Controls whether or not music will play
while you look at your FOXTEL Digital
Guide.
On *, Off Controls whether or not a 'beep' noise will
sound if you enter an incorrect PIN.
AC3 *, MPEG Controls the digital audio output from the
connectors marked 'OPTICAL AUDIO
OUT' and 'DIGITAL AUDIO OUT'. Select
AC3 if your equipment has Dolby Digital
decoding capabilities. The setting 'MPEG' is
for digital stereo sound. Note: Dolby Digital
is only available on some programmes. If
Dolby Digital is not available, the audio
output will be digital stereo.
– Choose your preferred language for
programmes or channels where more than
one language is available
57