Technical Specifications - Sf15I - JBL SoundFactor SF12Mi Installation Manual

SF15i
System Type:
Frequency Range (-10 dB):²
Frequency Response (±3 dB):²
Sensitivity (1w/1m):
Nominal Impedance:
Power Capacity:¹
Peak Power Capacity:¹
Maximum SPL:
Nominal Dispersion:
Crossover Frequency:
Dimensions (H x W x D):
Weight:
Shipping Weight:
High Frequency Driver:
Low Frequency Driver:
Input Connectors:
Enclosure Construction:
Grille:
Suspension:
Suspension Kit:
Notes:
1. "Power Capacity" and "Peak Power Capacity" ratings are based on the average and peak power handling capacity of product sam-
ples subjected to a 100 hour power test of the system design using IEC filtered random noise with a crest factor of 6 dB.
2. "Frequency Range" and "Frequency Response" are based on half-space response.
TIP GRD TIP GRD 1+ 1+ 1- 1-
IN / OUT
(PARALLEL JACKS)
8 OHMS
±1 FULL-RANGE
±2 N/C
MODEL SF15
JBL PROFESSIONAL
Northridge, CA USA
Made in USA
10
Specifications - SF15i
15" 2-way, sound-reinforcement speaker
38 Hz - 16 kHz
50 Hz - 12.5 kHz
98 dB SPL
8
250 watts
1000 watts
128 dB
90° x 50°
1.6 kHz
698.5 mm x 459.9 mm x 431.8 mm
(27.5 in x 18.11 in x 17 in)
27.4 kg (60.5 lbs.)
30.4 kg (67.0 lbs.)
JBL 2412, 1" exit compression driver mounted on Progressive Transition™ Waveguide
JBL M115-8A
Parallel Neutrik® Speakon® NL-4 (x1); 1/4" TS phone jack (x1)
19 mm (3/4 in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint
detail; covered in black carpet.
18 gauge, powder-coated steel
3x M10 threaded suspension points
3x 10 mm forged shoulder eyebolts with washer
+
HPF
-
+
LPF
-