Connecting the TV
You can enjoy high-definition and standard-definition
digital programming (if available in
your area) along with standard-definition
analog programming.
This TV is capable of receiving unscrambled
digital programming for both cable (QAM
and 8VSB) and external VHF/UHF antenna (ATSC).
I Cable or VHF/UHF (or VHF only)
75-ohm coaxial cable _
_
Rear of TV
CABLE/ANTENNA
• It is strongly recommended
that you connect the CABLE/ANTENNA
input using a 75-ohm
coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can easily be
affected by radio frequency interference,
resulting in signal degradation.
Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-
air antenna programming,
as indicated below.
A/B RF Switch
'_
___
Rear of TV
Cable
Antenna _[._
CABLE/ANTENNA
• Be sure to set the Signal Type setting to Cable or Antenna found under the Channel settings
for your input signal (page 43).
12