Table of Contents
Advertisement
• Hold the Table-Top Stand with one hand to avoid it dropping when attaching.
,/
X
......
• This TV is very heavy, so two people should place the TV onto thick and soft cloth.
• If using an electric screwdriver,
set the tightening torque at approximately
1.5 N.m (15 kgf.cm).
• Be sure to securely tighten the supplied screws, otherwise the TV may fall down.
• Use an appropriate
screwdriver to attach the screws tightly without damaging the screw head.
• Please ensure the AC power cord is away from the Table-Top Stand installation location when
you attach the Table-Top Stand.
• When detaching the Table-Top Stand, reverse the attaching procedure.
Do not remove any
screws other than those used when attaching the Table-Top Stand. Do not power on the TV with
its LCD panel facing down to avoid uneven picture uniformity.
9
Hide quick links:
Advertisement
Table of Contents
