Sony Bravia KDL-32R453A Operating Instructions Manual page 11

[] CABLE/
ANTENNA
[] VIDEO IN/
COMPONENT
IN/R-AUDIO-L
(MONO)
[] USB
RF input that connects to your Cable or VHF/UHF antenna.
This input port can be used as a composite video input (VIDEO) or as a
component video input (COMPONENT). For composite use, connect the
yellow jack to Y for video and use audio L (mono) and R for audio signal.
For component connection, use Y, PB, PR for video signals and also
connect the audio L (mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO and COMPONENT
when VIDEO or COMPONENT is connected.
To set to auto detection, press HOME, select Settings, and then select the
Setup settings. Select the Video/Component Selection option in AV
Setup then set to Auto.
Connects to USB equipment to access photo, music, and video files.
:3
LQ
O.
11