General; Connecting The Tv - Sony TRINITRON KV-20M20 Service Manual

SECTION 1
GENERAL Operating Instructlons remain as in the manual.
Step 1: Connecting the TV
You can use an indoor antenna, outdoor antenna, or cable
system with your TV. Outdoor antennas or cable TV
systems usually provide the best picture quality.
Connecting an Indoor, Outdoor
or Cable Antenna
Connect your antenna or cable to the TV's VHF/UHF
antenna terminal.
A, VHF only 76-ohm coaxial cable
or
or
Cable
If you cannot connect A antenna or cable directly to the
TV antenna terminal, follow one of the diagrams below.
a VHF only 300-ohm twin lead cable
or
or
VHF/UHF
Antenna connector
(see specifications for models)
¢ 75-ohm coaxial cable
VHF
and
UHF
300-ohm twin lead cable
Connecting to a Cable TV System
If your cable system requires use of a cable box, make the
connection as shown below.
ee ee
a
Cable box
Connectin : aVCR
See your VCR instructions to set up the VCR. After
connecting the VCR to the TV, you will be able to do the
following:
* Watch video tapes
* Record one TV program while viewing another
Check the model number of your TV and select the
appropriate connection diagram.
Notes
If your cable system si ay use of a Cable Box, install it
between the VCR and the TV.
For a monaural VCR, connect the audio output of the VCR to
AUDIO L (MONO) on the TV.
Connect your S-Video cable (KV-20V60 only) to the S-Video
input on the TV. S-Video will override your standard video
input, providing the most stable picture.
Cable QD cable
FO) VHF/UHF IN
FO) vHFWUHF ouT vies
AUDIO-A_AUDIO-L
For models
with mono
Inputs
Video Cable (not supplied)
AUDIO-R AUDIO-L VIDEO AUDIO-R AUDIO-L VIDEO
Connecting a Camcorder
KV-13M30, 13M31, 20830, 21RS30C only
Use this connection to view a video tape from a camcorder.
To audio
outputs
AUDIO R (red)
AUDIO L (white)
To video
output
Cable (not supplied)
Notes
* Fora monaural camcorder, connect the audio output of the
camcorder to AUDIO L (MONO) on the TV.
* If you are connecting your camcorder to a monaural TV
(KV-13M30, 13M31 only), plug the audio connector into the AUDIO
input on the TV.
¢ You can also connect a camcorder to inputs on the rear of the TV.
Connecting an Audio System _
KV-20830, 21RS30C only
To listen to TV audio through a separate stereo system, connect
the TV as shown below. See page 11 to switch to the external
speakers.
VIDEO 1 IN
©00
R-AUDIO-L(MONO) VIDEO
AUDIO OUT
Stereo
AUDIOINL System
(white)
«O))
AUDIO (FIX/VAR AUDIO (FIX/VAR
( Ae ay) { )
OUT L (white)
Audio Cable
{not supplied)
€O)
AUDIO IN R
(red)
The operating Instructions mentloned here are partlal abstracts from
the Operating Instruction Manual. The page numbers of the