Table of Contents
Advertisement
When positioning seats, it is your
responsibility to reconnect all
seat electrical harnesses. Failure
to properly connect power seat
electrical harnesses may result
in power seat functions being
disabled and/or the air bag light
illuminating.
Entervan front seats are
equipped with an exclusive "step
& roll" quick-release system.
Refer to the seat removal and
installation instructions provided
in this manual. Note: Driver and
passenger side front seats are
not interchangeable.
Contact your sales representa-
tive or call The Braun Corporation
at 1-800-THE LIFT if any of this
information is not understood.
Seat Base Rear Covers
Entervan front seats are equipped
with easy to remove rear seat
base covers. The covers must
be removed when removing and
installing seats. Refer to photo
at right. Simply pull back on the
covers to remove them (Velcro
secured). Align and push cov-
ers into position when reinstalling
seats.
Caution: Do not contact and
damage the seat base electrical
harness when removing and in-
stalling the rear seat base covers.
SEAT REMOVAL AND INSTALLATION
Pull back on Rear Seat Cover
®
Page 35
Advertisement
Table of Contents
