Table of Contents
Advertisement
A
Keeper
Align engagement feet with holes.
C
Fully-engaged Keeper
Keeper Fitting and "L" Track
Attachment Instructions
"L" Track
To Engage Keeper Fitting:
1. Insert keeper fitting into
track (align two engage-
ment feet with holes in
track). See Photo A.
2. Push down on fitting
and slide fitting 1/2 slot
in either direction until it
clicks and locks in posi-
tion (see Photos B and
C). Pull firmly on belt to
ensure fitting is locked in
track.
To Release Keeper Fitting:
Lift plunger and slide fitting
1/2 slot in either direction
and lift fitting out of track.
WHEELCHAIR AND OCCUPANT RESTRAINT
a. Push down
on keeper.
b. Slide keeper 1/2 slot in either direction.
a. Lift plunger.
b. Slide keeper and lift.
B
D
Page 29
Advertisement
Table of Contents
