Table of Contents
Advertisement
One Forward-Facing Wheelchair
and Occupant Belt Kit is supplied
for the restraint of one wheelchair
and occupant (details follow). "L-
track" is mounted in four locations
in the vehicle for belt securement
(shown in Figure 1).
Note: Wheelchair passengers
shown at right depict the available
seating positions. Wheelchair
capacity at Midpoint (Position C)
may have limitations based on the
physical dimensions of specific
wheelchairs. Additional Forward-
Facing Wheelchair and Occupant
Belt Kits must be purchased for
the restraint of each additional
wheelchair passenger.
The Entervan offers the following
options for placement and secure-
ment of wheelchair passengers.
WHEELCHAIR AND OCCUPANT RESTRAINT
Driver Seat: This seat (Position
A) can be removed and adaptive
driving systems custom tailored
for the driving wheelchair oc-
cupant can be purchased from
and installed by your local sales
representative.
Front Passenger Seat with Floor
Track: The passenger seat (Posi-
tion B) can be removed and the
seat location can be utilized by a
wheelchair occupant.
Midpoint Lowered Floor Area
with Floor Track: The Midpoint
lowered floor area (Position C) can
be utilized by wheelchair occu-
pants (capacity limitations apply).
Refer to the following guidelines,
illustrations, photos and instruc-
tions for proper use of the belt and
track restraint system.
Front Seat
"L" Track
Midpoint
B
"L"
A
Track
C
Midpoint
"L" Track
Figure 1
Front
Seat
"L"
Track
Page 25
Advertisement
Table of Contents
