Table of Contents
Advertisement
SEAT REMOVAL AND INSTALLATION
Front Seats: In an effort to
produce vehicles that can be
configured to meet a variety of
customer needs, the driver and
passenger seat bases have
been designed so they may be
removed. This feature allows
the owner and sales representa-
tive to determine the appropriate
seating arrangement to accom-
W ARNING
Park vehicle and
turn engine off
before removing
or installing seats.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Page 34
modate owner needs. Once the
desired seat arrangement is de-
termined, all power seat electrical
harnesses must be reconnected to
the appropriate fixed seat posi-
tions.
Driver's and passenger's side front
seats are equipped with "step &
roll" quick-release seat base at-
tachments that engage recessed
floor strikers (supports). The "step
& roll" quick-release front seat is
installed and removed as detailed
on pages 40-43 of this manual.
Power Seats: Entervan front
seats are equipped with electrical
wiring harnesses to accommo-
date optional equipment such as
heated seats, air bags, etc. Be-
fore removing seats, be certain
all seat electrical harnesses are
disconnected.
When seats are removed, the
seat electrical harness plug
must be connected to the
receptacle provided at the top
of the seat base. See Photos
B and D on page 37 of this
manual.
Adjustable Pedals: The ad-
justable brake and accelerator
pedal feature is disabled when
the driver seat is removed.
CAUTION
Disconnect seat
wiring harness
before removing
seat. Failure to do
so may result in
property damage.
Advertisement
Table of Contents
