Ramp Electrical Override - Braun 2008 & Up Chrysler Foldout Entervan® Operator's Manual

Ramp Electrical Override

An electrical override feature is
incorporated in the power ramp
system. The override by-pass-
es the electronic control system
to electrically power the ramp.
The override is available to stow
(fold) the ramp only.
The Ramp Override Switch is
located rear of the ramp in the
lower wall panel. Press and
hold the switch to stow (fold) the
ramp. Release the switch when
the ramp is fully stowed (stops).
Caution: If you stop pressing
the override switch before the
ramp is fully stowed, the ramp
may free-fall.
Ramp
Override
Switch
Press and hold this switch
to stow (fold) the ramp.
OPERATION
Page 21